Single vs. Double Bevel Miter Saws [Simple Guide]

Whether you are a part of the woodworking industry or pursue it as a hobby, the miter saw is a useful power tool. A miter saw is one of the primary power tools that every professional woodworker and a DIY practitioner should have in its garage or workshop. The performance and the efficiency of the miter saw, make it is a reliable power saw.

In a miter saw, a moving or rotating blade is used to work on a fixed piece of wood. This rotating blade affords more flexibility to the user as well as a greater range of motion. The miter saw is primarily designed for simple and accurate cross-cuts at the selected angles. These saws find its application in making the picture frames, crown molding, door frames, and other heavy-duty work.

All the knowledge about the miter saw sounds very straightforward, but when you get to a local hardware store or an online store, you confront with loads of options. It becomes a bit confusing and frustrating if you are not versed with the types and options available. Also, one of the most significant decision would be to whether pick a single or dual bevel miter saw.

The best way to make an informed decision is first to understand the capabilities of both the types and features that create a difference.

What Does Bevel Indicate?

A miter saw renders the user to make four types of cuts: cross-cut, bevel cut, miter cut, and compound cut. A bevel cut is a cut made at an angle other than 90 degrees, along the thickness of the workpiece. The bevel cut is not perpendicular to the top of the material.

Guide on Single vs. Double Bevel Miter Saw

Single Bevel Miter Saw

A single bevel miter saw, is designed so that it can make a cut that is angled in both directions. However, it can only make bevel cuts in a single direction, which is likely to be your left side. This is why the single bevel saw gets its name.

If you want to bevel cut at the opposite side, you will require to flip the work material over manually. Not only this, but you will also have to ensure that both the angles match up on each side. It implies that you can make a bevel cut in both directions using the single bevel saw. But should be prepared to sacrifice a lot of time, and the material as well, in case things go awry.

If you are not a professional woodworker and do not have many tasks to be completed, then a single bevel saw is just adequate.

Double Bevel Miter Saw

A double bevel miter saw is designed so that the blade can pivot in both directions. This enables the user to make bevel cuts in two different directions, that is, left and right, without needing to flip the material manually. The user is able to swing the blades so that bevel cuts on both sides of the material line up correctly.

With a dual bevel miter saw, making bevel cuts becomes more efficient and faster, it is especially useful for beginners. If you happen to perform a lot of crown molding, where you need to make a wide range of compound and beveled cuts, then the dual bevel saw can take you far.

However, this efficiency does come with a higher cost, but, this can be balanced out and considered almost negligible if you make regular use of the feature.

Differences Between Single and Double Bevel Miter Saw

Both types of miter saws can provide users with their distinct advantages as well as disadvantages. There are a few fundamental differences between the single and the double bevel miter saw:

Speed: In this category, the dual bevel miter saw possesses a considerable advantage over the single bevel saw. Since a dual bevel saw is able to pivot in both directions, it can make bevel cuts at the right and left side, without the need to flip the material. Thus, cuts are made much faster with a dual bevel saw rather than a single bevel miter saw.

Accuracy: Again, the double bevel miter saw wins the battle in this case. The user can swing the blade to match the angles on both sides of the wooden material. However, with a single bevel saw, each time the user flips the material to get the second bevel cut. It will also spend time in matching up the angles, which can be a tough job. If they miss the mark, their time, as well as materials, will be wasted.

Budget: Here is where the single bevel miter saw appeals to most users. With a dual bevel saw, you get extra precision and speed, but this comes with a higher price tag. For most projects, your budget decides which saw you ultimately opt for. A single bevel saw is more affordable to the user than a dual bevel saw, as it costs around a hundred dollars less than the later one.

So, Which One Should You Choose?

From the above list, most users will lean towards a double bevel miter saw. After all, since this type of saw can make the bevel cuts in both directions, it is able to provide the user with greater accuracy a well as higher speed. Thus, projects can be completed faster when this type of saw is used. But, you should not make such a hasty decision. Even though the dual bevel saw does offer its distinct advantages, it also costs the user more.

Hence when you’re choosing between the double and single bevel saw you need to analyze the uses of both. A single bevel saw will be a better fit for someone who doesn’t undertake woodworking projects often or is involved in minor home improvement tasks. On the other hand, if you are someone who likes to work on projects regularly, such as crown molding, then take a better look at dual bevel miter saws.

error: Content is protected !!